Use Tandemloc’s 6" Corner Caps to create your own lifting frame. Buy pipe locally, drill a hole in each end of the pipe for the retaining pin, and then create the exact frame size you require. Very efficient, economical and portable. Save a lot of money freight costs. You can also rent pipe from Tandemloc Rentals in pre-cut lengths. Call for details.
FRAME WORK LOAD LIMIT (WLL): 67,880 LBS @ 45⁰ Sling Angle
PROOF TESTED LOAD: 125% at @ 45⁰ Sling Angle
CORNER WLL: 16,970 LBS @ @ 45⁰ Sling Angle
CALCULATED WEIGHT: 180 LBS per corner (720 LBS)
FINISH: Sandblast, prime and paint safety yellow.
STANDARDS: Specification #EAD21000A applies.
Designed and manufactured to meet or exceed ASME B30.20 and BTH-1, Design Category B, Service Class 0.
PRODUCT NOTES:
- Frames may be made with equal length parallel sides in square or rectangle shapes.
- Pipe length should not exceed 35’ without contacting Tandemloc Rentals for additional information.
- Once pipe is cut a ø1.00" hole needs to be drilled through the pipe 2.00" from the end for the safety pin.
- Top slings are to only be made in a 4 leg assembly at 45° to 80°.
- Bottom slings are to pull straight down at 90°±5° to the frame.