Introducing Tandemloc's most economical bottom lift container sling to lift your ISO container.
ISO 3874 standards require that when lifting containers from the bottom corner fittings, a lift sling must be used. Tandemloc has designed and manufactured a simple and economical lift sling that meets the ISO 3874 standards. The AK25A00-01A-PA can be easily adjusted to lift a 20' or 40' container.
WORK LOAD LIMIT (WLL): 67,200 LBS
PROOF TESTED to 125% of WLL Proof Test Certificate provided
CALCULATED WEIGHT: 812 LBS
MATERIAL AND FINISH:
- Spreader Bar-Steel, Painted
- Wire Rope Legs-Steel
- Shackles-Steel, Galvanized Bow, Painted Pin
- Lift Lugs-Steel, Thermal Zinc
STANDARDS: Specification #EAD21000A applies.
GENERAL: All containers, corner fittings and sling equipment to be inspected for flaws and damage before use. Only equipment in good condition shall be lifted.
In some cases, ISO container measured lengths differ from size 20’ or 40’. Ref. I.S.O. STD. 668.
20'/40'combo slings have short wire rope legs for a 20' lift & four wire rope extensions for a 40' lift.
All rigging is included!